A Magimix Food Processor has a three-stage safety protection system and will only work if these are completed in the correct order. Always make sure you’ve pressed the STOP button before any of the following procedures.
Firstly, place the main bowl onto the motor unit with the handle positioned left of centre. Turn the bowl anticlockwise to lock it into place. If you are using one of the smaller bowls add them now, sliding them onto the motor shaft.
Next you need to lock the lid into position. Place the lid on top of the main bowl with the handle again slightly left of centre. Twist the lid anticlockwise until the lid locks into place. This should now align the safety rod with the switch.
Finally the food processor will only work if the large pusher is inserted in the large feed tube and the bottom of it lines up with MAX level indicator.
To remove the bowls simply follow the same steps as above but in reverse. Firstly press the STOP button. Remove the lid first by twisting clockwise and lifting off. Then remove the smaller bowls (if used) by lifting them out. Finally twist the main bowl clockwise to unlock it and lift off of the motor unit.
