Removing the tool/blade assembly
Step 1: To start, place a soft protection on your worktop as once the blade is loose it will fall out of the bowl.
Step 2: Turn the bowl upside down and use the cap.
Step 3: Turn the cap in a clockwise direction to release the blade.
Step 4: Holding the universal blade assembly by the top, remove the seal for cleaning.
Replacing the tool/blade assembly
Step 1: Attach the seal back on the blade. The seal has two straight sides to help you position it correctly.
Step 2: Slot the base of the blade assembly into the hole at the bottom of the bowl.
Step 3: Turn the bowl upside down, ensuring you are securely and safely hold the blade in place.
Step 4: Position the screw on the underside of the bowl and tighten with the cap by turning in an anti-clockwise direction.